7 Best Whittling Knife Reviews – (Buying Guide 2021!)

If your last search was anywhere around best whittling knife, then you’re at the right place. 

Casual whittling is ordinarily performed with a small-bladed knife, usually a pocket knife. Specialized whittling knives, with fixed single blades, are preferred for sculpting artistic work.

Whittling knives have thick handles which are easier to grip for extended periods of time, allowing more precise control and pressure.

Things you need to know about a Whittling Knife 

A best whittling knife steel is made of high-quality steel, reasonably hard, and takes a real edge.

A carving knife is quite narrow from top to bottom to allow cuts in concave areas, anything over 15mm gets in the way, this is where most general-purpose knives fail to make good carvers.

A relatively long thin blade without too much “belly” works much better for most cuts, the belly is that rounded portion of the edge approaching the point, ideal for skinning bad for woodcarving.

 Top 7 Best Whittling Knife Review 2021

Below, take a look at the table below to compare a variety of best whittling knives against one another based on price, size, blade material, and more:

1. Morakniv Wood Carving 120

Best Whittling Knife

First starting off with the best wood carving knife with the ideal design, the Morakniv wood carving knife. This knife is an excellent all-around carving knife and should be a part of any artist or woodcarver’s toolset. Moreover, the design is perfect and smooth.

Blade Thickness: 0.08″ (2.0 mm), Blade Length: 1.9″ (49 mm), Total Length: 6.7″ (169 mm), Weight: 1.7 oz. (49g)

Blade: Unlike most knives, all Mora knives arrive carving sharp right out of the box. The blade has a flat “Scandi-grind”, meaning there is no micro-bevel at the knife’s edge, which makes for a very sharp blade that is easy to maintain. The traditional design of the knife keeps the blade and fingers safe.

Handle: The handle is constructed of Oiled birch wood. The natural wood grain provides just enough texture and the vast belly gives you something to grip. The wooden handle is extremely comfortable and ergonomic.

The handle is nice and big to fit the large hands; and never gets in the way of your cuts.


Although his fixed whittling knife costs less than twenty-five dollars, but it is an amazing knife, comparable to many higher-end ones, as is always the case with Mora. Super pleased by this excellent knife, don’t hesitate to buy it!

2. Fury Nobility Raindrop Razor Edge

Best Whittling Knife

The Fury Nobility Raindrop 2-Inch Razor Edge Blade, Folding Knife, RosePakka Handle is manufactured by Joy Enterprises, the owners of Fury, Fury Tactical and Mustang products. It’s one of the cheapest whittling knives ever.

Blade: The blade is consist of 440 Stainless Steel Blade. The knife has Razor Blade Edge & good to carve woods with ease and comfort. It cuts cleanly and capable of making small inverted cuts.

Also, It’s pretty good at slicing the careless whittler’s thumb so wear a thumb guard or glove with this, or any other, whittling knife.

Handle: The handle is constructed of RosePakka hardwood with stainless pins. The handle is smaller than we thought it would be, but it’s surprisingly easy to handle despite this and makes a good grip.


You can use this for some light whittling of the edges of some wooden poles, it will be smooth and straightforward for the job. It’s not among the outstanding whittling knives, but it works well as it just costs a few bucks.

3. Case Cutlery 06246 Black G-10 Seahorse 

Best Whittling Knife

The #06246 Seahorse Whittler features a Smooth Black G-10 handle, Tru-Sharp stainless steel Wharncliffe, Pen and Coping Blades, and Case Oval shield. The Seahorse Whittler measures 4″ closed and weighs 2.6 oz.

Blade: The Seahorse whittler knife comes with 3 blades as you can see in the above image. The main blade is quite thick and excellent for quick removal of wood, and the fine tip will let you make little details with comfort.

The other two smaller blades are remarkably thin and tend to bend a little when you use them so they’ll strictly be used for surface detail removing little more than a layer of wood at a time. The main blade is absolutely strong enough to take it and get your work done.

Handle: The handle is consists of G-10 material which is often considered as the best material to be used with-in quality knives by top knife brands. Since the handle is made of G-10 material, there is no doubt it will hold the grip quite well. The handle is really nice and feels nice in the hand.


There is no flex in any of the blades, the cuts are cleaner, and the grip is more comfortable. It’s not as pretty or as light, but it’s better for whittling. The main blade is sharp enough to do indoor stuff as well. The design is pretty impressive and designed very well but you’ve to be careful while using it else you’ll end up hurting your lovely finger.

The design is pretty impressive and designed very well but you’ve to be careful while using it else you’ll end up hurting your lovely finger. Overall, it’s a decent knife, full marks for the blade quality and the material used for the handle.

4. Flexcut Carving Jack Wood Carving Knife

Best Whittling Knife

The blades of this unique carving tool fold into their handle just like a pocket knife’s blades. Professional whittlers will admire the high-quality edge-holding features of Flexcut’s resilient spring steel blades.

The Carvin’ Jack features six tools: 3/4″ #7 sweep knife blade, 3/8″ #6 scorp, 3/8″ #11 gouge, 3/8″ #1 straight chisel, 1-3/8″ detail carving knife, and 1/4″ 70º V scorp. This is a very strong, well-made, serious woodcarving tool.

Balde: The knife comes with 6 tool blades that are outstanding. The blades are constructed of High Carbon steel. The blades are amazingly sharp and hold an edge for a long time.

It’s easy to slice skin without even trying. We would strongly recommend a carver’s glove. If you think that it must be hard to open the blades with ease, then it’s just your suspect. All the blades open smoothly.

If you think that it must be hard to open the blades with ease, then it’s just your suspect. All the blades open smoothly. The blades are tightened in the beginning but with time they loosens or you can you the oil.

Handle: The carving jack handles are mostly small and medium projects, hardwoods and soft. Handle stick to hand enough means the handle is quite grippy. The handle is small, but it’s surprisingly easy to handle despite this and makes a good grip.


On the whole, we are very pleased with the carving jack knife. The blades are very sharp, and the handle is pretty grippy. Though, you’ve to be careful while opening the knife because the blades are tight; little hard to open but that being said, you can use the oil and they will be perfect to use.

This is a very handy Whittling Knife- use it every day. You can make good sculptures with this whittling knife.

5. Flexcut Whittling Jack Wood Carving Knife

Best Whittling Knife

Flexcut whittling Jack is the smaller two-bladed version of the original Carvining€TM Jack and Pocket Jack. Its two-bladed design features the most needed blades any carver could need.

It weighs in at just 3 ounces and is just over 4″ long when closed, so it neatly fits in your pocket. Blades do not lock in place.

Balde: The blades are constructed of hard carbon steel material. It is designed by woodcarvers for woodcarvers, Flexcut features flexible blade shafts with razor-sharp cutting edges to give woodcarvers maximum control over each cut.

Each blade is precision-machined from high carbon content steel for a hard cutting edge that stays sharp. Each blade is hand-sharpened at the factory and tested before shipping.

The back edge of the blades is square thus is uncomfortable when pushing with the thumb. A slight rounding of the edges would have brought relief.

Handle: The knife is constructed with an aluminum Handle with Wood Inlays. The tools have ergonomically designed handles that enable extended periods of carving without hand tiredness.

In simple words, it’s a comfortable handle and makes an excellent grip that too for a long time. The handle length is not bad at all and fits into the hands correctly.


This carving knife is of great value, and we highly recommend it. It has the potential to enhance the level of enjoyment you receive from carving/whittling. You can pack this knife and a block of basswood anytime you go camping, sailing, or on the beach. You won’t be disappointed at all.

6. Flexcut Tri-Jack Pro Whittling Knife

Best Whittling Knife

The Tri-Jack Pro has three blades that lock in place – a roughing knife, a detail knife, and a mini-cutting knife. The roughing knife is great for modeling surfaces and creating texture while the detail and cutting knives let you easily make the finest cuts.

Blade: Like other flex carving knives this tri-jack pro’s blade also consists of hard carbon steel material. It is “Flexcut” quality, and has three great high quality, remarkably sharp blades you can use at home, or especially while traveling! This could be your favorite pocket woodcarving knife.

Handle: Its handle is pretty different. It’s not a straight handle, many curves on the handle but that doesn’t affect the grip because this design is specially engineered for grip purpose. The Pistol Grip design minimizes hand fatigue and is made of aerospace-grade aluminum with a quarter-cut cherry inlay.


On the whole, we are very pleased with the carving jack knife. The blades are very sharp, and the handle is pretty grippy.

You can pack this knife and a block of basswood anytime you go camping, sailing, or to the beach. You won’t be disappointed at all. It’s pretty similar to other flex cut carving knives but it has got three blades.

7. Morakniv Wood Carving 164

Best Whittling Knife

The Morakniv Wood Carving 164 Hook Knife for a spoon and detailed wood carving is single-edged with a carbon steel blade (RC 59-60) and has a single bevel making it suitable for pull cuts with your right hand or for push cuts with your left hand.

Blade: The knife is single-edged, and made of carbon steel blade. Blade length is 2.0 inches (50 mm). The back of the blade is thick and flat so it rubs on the spoon bowl as you cut, forcing the edge to dig in and chatter, leaving little speed bumps in the wood.

After a little sharpen the edge is perfectly fine. It makes spoon carving much easier.

Handle: The handle is consists of Oiled birch wood material which is concerned as a good material for knife handles. It is light enough to keep it in the pack when camping/hiking and the birchwood handle is comfortable to use and durable. The handle comes unfinished which we liked as you can put a nice finish of your own.


This carving knife is not forgiving due to the several carving methods it can be used for. It is extremely sharp right out of the box and needs some focus to prevent harmful cuts. As with all mora knives, this is a worthy woodcraft knife and makes a great addition to any woodsman’s kit.

Overall, though, It’s a great carving knife. The Knife has a Good grip, shape, and has good steel. It’s worth every single penny. And, It’s pretty much affordable, it just costs $24 for such nice specifications and quality.

Wrapping Up

So these are our recommendations for the best whittling knife. We have listed the knives which are best for carving. The point of mentioning multiple whittling knives is that everyone has got a different budget. Not everyone can afford 100$ or 200$ knife, so they can pick the whittling carving knife within their budget.

Don’t forget to check out our latest edition of best Folding knife – both modern and traditional pocket folders